Skip to main content

Furuno FA-170 (NMEA over Ethernet)

NMEA output over Ethernet

M
Written by Marcin Fryda
Updated this week

System overview

LAN port

The transponder unit FA-1701 contains a LAN port as indicated below. It is possible to output NMEA sentences via this port.

NMEA over Ethernet settings

Below is the procedure for setting the NMEA output over Ethernet.

The IEC61162-450 protocol must be used.

Remember that the [INITIAL SET] menu can be accessed at any time; however, settings are password-protected and require a qualified technician or dealer to enter the password. Please contact Marine Traffic for further information.

Did this answer your question?