easy configuration

AIS data can be stored

only available for Windows

only one UDP output can be configured

In the main view, you will see the key components that you can manage

Under Input, Serial must be activated to receive data from an AIS receiver

For Output, it is sufficient to activate UDP

You can manage all other functions according to your personal needs

Once you have ensured that Serial is set as Input and UDP as Output, click on Options

In the options window, first focus on the Input on the left side

For Serial, set your COM Port and the appropriate baud rate (Speed),
which is usually 38400

Under Output on the bottom right, in the Client field,
enter the DNS or IP address you have received

In the Port field, enter the port number you have also received

Confirm the changes by clicking Save and then close the window

To start receiving and forwarding the data, click Start on the left side

In the upper right part of the window, you will now see that data is being
received and forwarded